Autel MaxiIM IM608 Pro ‒ Autel TOP Key Fob Programming Tool & Diagnostic Scan Tool

Autel MaxiIM IM608 PRO Key Programming Tool & Key Programmer for All Vehicles

As a professional mechanic or a DIY enthusiast, a car key programming tool is a vital device to have. Some scan tools are single-purpose, used exclusively to generate new car keys, and others include a range of diagnostic functions and maintenance functions. However, Autel MaxiIM IM608 PRO is such a comprehensive car scanner that combines professional IMMO functions & key programming and holds powerful diagnostic features for most systems in one.

Supports Muti-Language

English / Portuguese / Germany /French / Spanish / Italian/ Dutch/ Polish/ Swedish/ Turkish/ Russian/ Arabic

Key Reasons to buy Autel MaxiIM IM608 PRO Key Programming Tool

1. (NEW) 2-Year Software Update: Autel IM608 Pro comes with 2-Year free software update (worth 1790 bucks). Autel IM608 Pro can help you save 895 bucks more than Autel MaxiIM Series IM608/IM608 PRO II/IM608S II professional key programming tools that only support 1-year subscription-free.

2. (NEW) Autoauth for FCA SGW: IM608 PRO supports FCA AutoAuth, allowing you to read and clear codes, and perform active tests & special functions for Chrysler FCA models after 2018 without special adapters. NOTE: For a few Renault and FCA cars, when doing IMMO key programming, "Autoauth" is not enough, still need a 12+8 adapt

3. Advanced IMMO Functions, Upgraded From Autel IM608: Read PIN/ CS (All K~ey Lost), Generation K~ey, K~ey Learning/ Remote Learning, IMMO ECU Reset/ Adaptation/ Refresh/ Coding, BMW CAS4/3/2 K~ey Learning, Backup/ Restore IMMO Data, BENZ 3rd Generation IMMO Add K~ey, All K~ey Lost, K~ey Learning, BMW FEM/BDC K~ey Learning, and ECU Adaptation.

4. High-end K~ey Programming: EEPROM Read/Write; MCU Read/Write; Immobilizer Read/Write; Engine Read/Write; Mercedes Infrared Key Read/Write; Remote Frequency Detection…

5. APB112 & GBox 2: This Autel im608 pro bundle includes APB112 & GBox 2 accessories to help you work perfectly with IM608 Pro to expand more functions. GBox 2 can read 8 times faster, which greatly improves the efficiency of reading BMW models; APB112 can support 46, 4D Data Collection, 46 Smart K~ey Password Calculation for Hyundai/Kia 46, Smart K~ey All-Key-Lost for Toyota/ Lexus, etc.

6. Online ECU Coding Same as MK908/ MS919/ MS909: Autel IM608 Pro diagnostic scanner with advanced ECU Coding capability to personalize car settings like folding rear-view mirror, disable annoying car settings like seat belt chime, daytime running light, and maximum speed limiter, perform Online Coding, Component Matching, Adaptive Data Reset to enhance vehicle performance after component changing.

7. VAG Guided Functions: With VAG Guided Functions, IM608 Pro can perform complex functions to help your diagnostic step-by-step with instructions on VW, Audi, Skoda, etc. This greatly improves work efficiency.
38+ Service Functions: Autel IM608 PRO auto diagnostic scanner with 38+ services functions including Oil reset, SRS, SAS, EPB,Injector Coding, ABS Bleeding, D-P-F, BMS, Throttle, IMMO, SRS, and more.

8. OE-Level Full Systems Diagnostic: IM608 Pro has the OE-Level diagnostic which can access and diagnose all available vehicle modules to read and clear codes, live data, freeze frame, active test, ECU information, adaptation, matching, coding, etc.

9. 10000+ Vehicle Coverage and NO IP Restriction : Broad vehicle coverage, work on more than 85 car brands, 10000 cars, and it is still growing. Autel IM608 Pro has NO IP Restriction, you can take it to any other countries to expend your business.

10. Powerful Hardware Configuration: Extraordinarily powerful Cortex A7+A15 six-core processor; 10.1-inch LED capacitive touch screen with 1920x1200 resolution; Internal reliable 64GB On-board Memory for better performance; built-in 8-megapixel rear camera with autofocus and flashlight.
NOTE: Autel IM608 Pro can't perform ECU Programming. Please refer to Autel MS908S Pro II(B089SXCS5R) if you need ECU Programming.

NOTE: All services and functions of Autel IM608Pro cannot work on all vehicles, please check compatibility by providing car VIN(17 digits), vehicle year, engine, and features you need before purchasing

2023 Newest XP400 Pro Key Programming Tool: Upgraded from Autel XP400

Autel MaxiIM IM608 Pro with XP400 Pro key programmer can perform various key programming functions such as read & write EEPROM/ECU/MC9S12 Encryption Ch~p/for Mercedes Infrared Key/IC C~rd, Remote Frequency Detect, Support PC etc. Connect the IM608 Pro to the XP400 PRO Key Programmer (no vehicle connection required) to access the key ch~p, read, retrieve and write key information, as well as other key related functions.

What’s the upgrade of XP400PRO from XP400?

1. Expanded EEPROM functions for more component access
2. O~dometer Component Reading: Chip types upgraded from 9 to 171, newly added 162 Chip Types.
3. Immobilizer ECU Component Types: Chip types upgraded from 168 to 181, newly added 13 Chip Types.
4. Engine ECU Component Types: Chip types upgraded from 40 to 41, newly added 1 Chip Type.
5. MCU Component Types: Chip types upgraded from 1541 to 2067, newly added 526 Chip Types.
6. EEPROM Component Types: Chip Types upgraded from 330 to 445, newly added 115 Chip Types.
7. 11 Key Types to un~lock (Audi/BMW)
8. Besides, Autel XP400 PRO no Burnout anymore. Autel XP400PRP can work with Autel IM508, IM608, IM608Proto perform professional IMMOo Key functions.

2023 Autel MaxiIM IM608 Pro ‒ TOP IMMO & Key Fob Programming Bundle

2023 newset Autel IM608 PRO is upgraded from IM608. IM608 PRO has Autel's top IMMO & key programming function, it adds a variety of chi~p types on the basis of IM608, which can be applied to a wider range of models. In addition, this bundle also includes APB112 and GBOX 2, which can help you achieve more key programming functions.

Main IMMO Features of Autel IM608 PRO:

1. eading/Writing EEPROM (all-key-lost)
2. Universal Key Generation
3. Backup /Restore IMMO Data
4. IMMO ECU Reset / Adaptation / Refresh / Coding
5. Universal Key Information Detection
6. B~ENZ 3rd Generation IMMO Add Key, All-Key-Lost, Key Learning
7. B~MW FEM / BDC Key Learning and ECU Adaptation
8. Key Learning for BMW CAS4/3/2
9. Key Learning, for VW / AUDI MQB 48 Transponder (96-bit) Add Key, All-Key-10.Lost, A6 All-Key-Lost
11.Chip Simulation (Work with APB112)

APB112: 1. Smart key simulator; 2.Compatible with IM608(Pro), IM508, and MX808IM; 3.Compact but need to be used with the XP400/XP400Pro; 4. 46, 4D data collection; 5.46 smart key password c~alculation; 6. 46 ch·ip simulation；7.T~oyota 4D (94/ D4, 98) smart key simulation；8.T~oyota H (88/ A8, A9, 39) smart key simulation；9.Collects data from the ignition coil；10. Identify ignition coil troubles；11.Decode vehicle key chip data；12.Simulate vehicle key chip (ex - 4D chip)；13.Toyota/Lexus smart key all-key-lost；14.Chip d~ecoding (for Hyundai 46).

GBX2:1.For Mercedes Benz All-Keys-Lost; 2.Used for Faster M~ercedes ECU data and EIS password c~alculation; For M~ercedes DAS3 can EIS /EZS all-key- lost; 4.Reduce time reading W204 ECU data & W207 EIS by over 85%; 5.No need to remove and reinsert the key for W221 & W164 after 2009 models; 6.For B~M~W DME /DDE ISN reading and writing in boot mode; 7.G-BOX 2 is compatible with Autel MaxilM IM508/ IM608/ IM608 Pro/ OTOFIX IM1.

ECU Coding: Customize Your Car in Minutes

Autel scanner IM608 PRO can make use of the ECU coding function to serve your vehicles. Create a win-win situation: Upgrading the business capacity, bringing more customers, and increasing your income.

1. Recode the adaptive data to certain components after repairs or replacements.
2. Customize some OE settings to fit your appetite like setting alarms, doors locking, signal, etc.
3. Reflash the hidden features to deactivate/activate some functions.
Improve the vehicle performance.
4. Active Test: Quickly Pinpoint Problems

Active Test: Quickly Pinpoint Problems

Active test is an efficient feature for pinpointing vehicle problems. It is no longer that struggling to disassemble parts, you can quickly locate wrong issues on your fingertips. Autel IM608 PRO car scanner can command a module to perform bi-directional control for check cause. Usually applied in Turn on/off the lights; E-G-R Test; Injector Test; Open/Close Windows; Operate Mirrors; etc.

OE Level Full Systems Diagnostics:

IM608 PRO has the same level diagnostic capabilities as MK908, MK908P. It can access and scan all available electronic systems to perform OE level diagnostics, including read and clear codes, view live data steam, ECU information, perform various active tests, matching & adaptations, ECU Coding and etc.

Wireless Connection

Among all methods, BT pairing is recommended as the first choice for the communication between the tablet and the MaxiFlash. The working range for BT communication is about 210 feet (70 m); this means you can perform key programming and vehicle diagnosis freely around the workshop with greater convenience.

36+ Maintenance Functions Make All Diagnostic Work Perfectly Done

Autel IM608 pro professional scan tool can perform a wide range of actions as well as a number of special functions that make it an even more astonishing piece of equipment. These special functions include but are not limited to:

Oil Reset: Reset the oil life systems every time the oil and oil filter are changed;
EPB Reset: Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc;
ABS Bleeding: When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
SAS Adjustment: Perform steering angle sensor calibration and clear records;
BMS Reset: Register the new battery to the ECU after replacement.
Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
Injector Coding: Code the injector after replacing or adjusting it to correct the fuel injection volume of each cylinder more accurately.
Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
Gear Learning: The crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.
Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit has a communication problem or changes.
Key Programming/ IMMO: Add K~eys, disable the lo~st vehicle keys, and program a new replacement k~ey fob.
More Special Functions Added: Steering position sensor calibration, Z~ero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, Idle Learn Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Language change, A/F Settings, Stop/Start Reset, etc.
NOTE: Service/Special Functions are NOT universally compatible. Please send us VIN number and the functions you want to check compatibility before purchase.

2-Year Updates, NO IP Restrictions, 10000+ Extensive Vehicle Coverage

2-Year Free Software Updates: 2-Year Free Software Update service keeps the Autel IM608 Pro up-to-date with the latest features and supported vehicle range. Except for the online diagnostic and upgrade function, all other functions can be used in case of disconnection and non-renewal of subscription.

Global Version: Autel IM608 PRO Bundle has no IP restrictions, you can take it all over the world to expand your business

10000+ Extensive Vehicle Coverage: Covers over 95% of the model years of 2000+, some latest up to the year 2022 models

Autel IM608 Pro key programming, diagnostic & service all-in-one scan tool can work on over 80 American, European and Asian vehicle makes and models to scan all available systems to perform diagnostics, services, and IMMO & K~ey programming functions, including:

USA: Compatible with Gm(GM/Chevy/Cadillac/Buick), USAFord, Chrysler(Chrysler/Dodge/Jeep), Willy;
Europe: Compatible with BMW, Vaz, Porsche, Maserati, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR, Maxus, Iveco;
Aisa: Compatible with (JAPAN) Acura, Daihatsu, Honda, Infiniti, Isuzu, Jpisuzu, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Scion, Subaru, Suzuki, Tlisuzu,Toyota (KOREA) Daewoo, Hyundai, KIA, Samsung, Ssangyong; (CHINA) Baic, Beijing, Changan, Changan-Ford, Changcheng, Changhe, Chsuzuki, DF Peugeot, DF Honda, DF Nissan, DF XK, Flyer,BYD, Fukang, Futian,Foton, Geely, Gonow, GZ Honda, Hafei, Haoqing, HC BMW, Hmada, Huachen, Isuzu, JMC, Jacty, Jianghuai, Jiao, Jinlong, Joylong, Lifan, Liuwel-TY, Luxgen, NJ Fiat, Qirul-TY,chery, Qoros, Saicmg, Spark-TY, Trumpchi GAC, Weili, Xiaokang Dongfeng, Xili,Faw Tianjin, Xinkai, YQ Mazda, Zhongshun, Zhongtai, Zotye, Zhongxing, Xiali, Qirui_ty, CMC;(INDIA)Mahindra, Maruti, Tata;(MALAYSIA) Perodua, Proton, (IRAN)IKCO,MVM,SAIPA, (VIE).Vinfast;
Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM;

Add-Ons Compatibility: Autel MaxiIM IM608 Pro automotive k~ey programming tool can work on Autel Add-Ons to further expand the capabilities like digital inspection camera MV108 for more inspection, APB112 Accessory Tool for Toyota Key Generation, GBox 2 accessory & IMKPA kit to expand more immo functions.

NOTE: This Bundle includes extra APB112 & GBox 2 accessories. Autel MV108 oscilloscope and IMKPA are NOT included in the package. If you need the Autel MV108, please refer to (B0B31HCHNB). NOTE: Be aware that Audi key programming is very limited, please send VIN to check compatibility before purchasing.

Note:
The equipment does not have the following special cars, if you need the following models, please contact us after receiving the equipment, we will provide you with the contact information of the local dealer, you yourself contact the offline dealer to add processing:
Australian car: Fordau, Holden
Malaysian car: Perodua,proton
Brazil, Latin America, South America: Fiat Brazil, Gm Brazil, Maruti Suzuki,Mahindra
Indian cars: Maruti Suzuki, Mahindra, Tat, India Datsun

IMKPA Key Programmer Kit

An advanced locksmith kit with 12 adapters, Autel IMKPA needs to work with the 2023 new IM608 PRO & XP400 PRO programmer to do high-level key programming for BMW/Benz/VW/etc., which includes Read/Write/Erase for Mercedes Benz ESL_W209 / W906 Data, Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and VW/Audi/BMW/Benz Key Unlock.

G-BOX2 Key Programming Adapter

The Autel G-BOX2 is an adapter (compatible with Autel IM608 PRO & XP400 PRO) used to program keys for Mercedes-Benz DAS3 CAN EIS/EXS (All Keys Lost), Mercedes-Benz All Keys Lost Password Calculations and DME/DDE ISN Reading & Writing in Boot Mode or Bench Method for BMW. This G-Box2 contains cables, fuse connector, and CAN line connectors.

APB112 Smart Key Simulator

Autel APB112 smart key simulator is designed to collect data from the ignition coil and identify ignition coil troubles. When pairing with this Autel IM608 PRO key programmer, it can collect vehicle key/chip data (for Hyundai, for Toyota, for Lexus), perform Toyota 4D (94/D4, 98) & Toyota H (88/A8, A9, 39) smart key simulation, and solve Toyota & Lexus smart key all key lost issue.

Autel MaxiIM IM608 Specification

Operation System: Android 4.4.2,KitKat
·Processor: Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15)
·Memory: 2GB RAM & 64 GB On-board Memory
·Display: 10.1-inch LED capacitive touch screen with 1920*1200 resolution; Wi-Fi：(802.11 a/b/g/n/ac); USB 2.0
·Connectivity: BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI
·Camera(rear): 8.0 Megapixel, AF with Flashlight
·Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
·Audio: Microphone; Dual Speakers
·Input/output: 3-Band 3.5mm stereo / standard headset jack
·Power and Battery: Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃
·Input Voltage: 12V (9-24V)
·Power Consumption: 6.5W
·Operating Temp: 0℃ to 50℃ (32 to 122℉)
·Storage Temp: -20℃ to 60℃ (-4 to 140℉)
·Dimensions(W*H*D): 300mm (11.81") x 220.0mm (8.66") x 50.0mm (1.97")
·Weight NW: 1.42kg (3.13lb.)
·GW: 8.655kg(19.08lb)
·Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN

Package Contents

main unit
main cable

USB Cable
Mini USB Cable
Connects the Display Tablet to the PC.
AC/DC Adapter (12V)
Light Fuse
6*30mm (2pcs)
Cigarette Lighter
AAC001
MED17 Cable
APC001 (USB Cable)
Figure 2-6 Main Cable

APB101+APD101
EEPROM Adaptor + EEPROM Adaptor Shell
APB102
MB IR Cable
APB104
MCU_FQFP64
APB105
MCU_FQFP80
APB106
MCU_FQFP112
APB107
MCU_FQFP114
APB108
MCU_FQFP176
APA002
EEPROM Socket
APA101
Signal Cable

APA103
EEPROM Clamp
APA104
ECU Cable
APA105
MCU Cable
APA106
MC9S12 Cable
APA107
Connect Cable
Quick Guide